{"id":8789,"date":"2021-09-10T23:05:03","date_gmt":"2021-09-10T21:05:03","guid":{"rendered":"http:\/\/plus.maciejpiasecki.info\/index.php\/2021\/09\/10\/how-to-add-expandable-storage-to-your-ps5-using-an-m-2-ssd-updated-september-2021\/"},"modified":"2021-09-11T22:08:58","modified_gmt":"2021-09-11T20:08:58","slug":"how-to-add-expandable-storage-to-your-ps5-using-an-m-2-ssd-updated-september-2021","status":"publish","type":"post","link":"https:\/\/plus.maciejpiasecki.info\/index.php\/2021\/09\/10\/how-to-add-expandable-storage-to-your-ps5-using-an-m-2-ssd-updated-september-2021\/","title":{"rendered":"How To Add Expandable Storage To Your PS5 Using An M.2 SSD \u2013 Updated September, 2021"},"content":{"rendered":"

It\u2019s a great day for PS5 owners who are eligible to take part in the first PS5 beta software rollout, as they can now add expandable storage to their consoles. You might be wondering how you add expandable storage to your PS5 though.
\nMaybe you\u2019re already aware that you can add more storage to the console. But maybe you\u2019re unaware of the compatible derives. And you\u2019re not quite sure how to add the drive to your system so things work as intended.
\nNot to worry. If you\u2019ve been asking yourself any of these questions, we\u2019ve whipped up a little guide to help walk you through the process. It\u2019s not a terribly difficult process to complete. But you also don\u2019t want to just go willy-nilly and slap an SSD in there.
\nYou\u2019ll find all the steps you need to add expandable storage to your PS5 below. Also keep in mind, that there\u2019s no point in you physically going through the steps unless you have the beta software that started rolling out today. As the system won\u2019t recognize your M.2 SSD without it. But, it doesn\u2019t hurt to know what to do for when you have the feature support.
\nWhy add expandable storage to your PS5?
\nThere\u2019s one main reason why you\u2019d want to do this. And really, only one reason in general. And that\u2019s so you can have more room for games to be installed on your PS5. Technically, you had more storage for games at launch. But this was only possible through the external storage drives, and you can\u2019t run games from those as they can only store your games.
\nBy adding the expandable storage through the M.2 SSD, you can store\u00a0and\u00a0run the games from that drive. So there\u2019s no need to move games back and forth. You can also use the M.2 SSD for storing PS4 games, and media apps as well.
\nTools to grab before you start
\nA soft cloth to lay the console down on
\nA Flat Head screwdriver
\nA #1 Phillips Head screwdriver
\nHow to add expandable storage to your PS5
\nFor starters, you\u2019ll need an M.2 SSD to use. We\u2019d suggest this one from Western Digital, as it meets the recommended specs and it comes with a heatsink already attached. But it\u2019s not the only one that would work. The requirements are listed at the end of this guide.
\nInstall the PS5 system beta software
\nFirst things first. You need to make sure you install the PS5 system beta software. As you need the software for the M.2 SSD storage slot to be supported. To potentially receive the software, you need to register to participate in the beta program. And you can do that here. Keep in mind though that registering does not guarantee access to the beta software update.
\nOnce the software is installed, power off the console<\/p>\n

After the installation finishes, make sure to power off the console. You can do this by either using the DualSense controller to bring up the dock and finding the power options, or by pressing the power button on the console and holding it down for three seconds to power it down manually.
\nUnplug the console from the power source along with any other cables<\/p>\n

Next, make sure to unplug the PS5 from whatever power source it\u2019s plugged into. Also unplug any other cables, like USB\u2019s that may be plugged into the back ports, the HDMI cable, etc. Basically just unplug the console from everything.
\nLay the console down and remove the base\/stand
\nYou\u2019ll need a flat-head screwdriver for this part. After you have that, lay the console down and unscrew the base\/stand from the console using the flathead screwdriver. A coin that fits into the screw\u2019s notch will also work. As will really anything that fits into the notch.
\nAlso important to note is that you need to lay the console on its side with the disc drive facing upward. Like shown in the image below.
\nRemove the faceplate<\/p>\n

Next, you need to remove the faceplate to get to where the M.2 SSD slot is located. To do this, simply grab the top corners of the plate, then gently pull the plate up and towards you to unlatch it. Listen for a small click as you should hear one.
\nRemove the cover from the M.2 SSD slot<\/p>\n

Once you have the console\u2019s faceplate off, you should easily spot the M.2 SSD slot. You can see it marked in the image above. There will be a single screw on the cover of the slot, which you need to remove using the Phillips Head screwdriver.
\nRemove the screw and spacer at the top of the M.2 slot<\/p>\n

Once you have the cover removed, you\u2019ll see a screw and a spacer that sit near the top of the M.2 slot. Take these out and the adjust them to the size of the M.2 SSD you have for your console. You should see additional holes for the screw and spacer based on how long or short your drive is.
\nAlign your M.2 SSD with the connector<\/p>\n

Next, make sure and align your M.2 SSD with the connectors on the slot. As shown in the image above, start by aligning the SSD diagonally and then give the SSD a firm press into the connector.
\nIf the SSD is incorrectly connected, then you can damage the SSD terminal or the console itself, which you don\u2019t want to do. So make sure it\u2019s done correctly before moving on.
\nLay the M.2 SSD flat and secure it with the bracer and screw<\/p>\n

Now lay the SSD flat into the slot after it\u2019s connected properly, then secure it with the bracer and screw. Then, reattach the cover on top of the M.2 SSD slot and secure that with its own screw.
\nAfter all that\u2019s done, reattach the base\/stand and faceplate, and then plug all the cables back in and connect the PS5 back up to the power source. Then power on your console and you should nearly be good to go. Once powered on, the PS5 will prompt you to format the M.2 SSD. Follow the prompts to get through that and you can start using it for storing and running games.
\nRemoving the M.2 SSD from your PS5
\nThe process for removing it is basically the same as the process for inserting it. When removing the actual drive, you pull diagonally upward.
\nM.2 SSD requirements for the PS5<\/p>\n

Chances are a lot of different drives will work. But Sony has still set out some requirements for compatible options.
\nIt has to be an M.2 NVMe SSD. It will also need to be running on PCIe Gen4 technology, and have a read speed of at least 5,500MB\/s. Attaching a heatsink to it is optional, but Sony does highly recommend attaching one. So you\u2019re probably best off getting a drive with one already attached, unless you already have a drive and a heatsink laying around that you can use.
\nThe capacity for the drive has to be at least 250GB, and can\u2019t be more than 4TB. The module width must be 22mm, and the form factor has to be M.2 type 2230, 2242, 2260, 2280, or 22110. The socket type also has to be Socket 3 (key M), and the total size including the cooling structure must be smaller than 110mm in length, 25mm in width, and 11.25mm in height.
\nCompatible SSDs
\nThere are a range of different PCIe Gen4 NVMe SSDs that will work for the expandable storage on the PS5. For the most part if they\u2019re PCIe Gen4, they should work. However, it is worth noting that they do need to meet the requirements for size and function. Some potential options include the WD_Black SN850 with a heatsink from Western Digital. As well as the Firecuda 530 with a heatsink from Seagate. You can find more options on our buyer\u2019s guide list here.
\nThe post How To Add Expandable Storage To Your PS5 Using An M.2 SSD \u2013 Updated September, 2021 appeared first on Android Headlines.
\n
\nSource: ndroidheadlines.com <\/p>\n","protected":false},"excerpt":{"rendered":"

It\u2019s a great day for PS5 owners who are eligible to take part in the first PS5 beta software rollout, […]<\/p>\n","protected":false},"author":3,"featured_media":8790,"comment_status":"false","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-8789","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-bez-kategorii"],"_links":{"self":[{"href":"https:\/\/plus.maciejpiasecki.info\/index.php\/wp-json\/wp\/v2\/posts\/8789","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/plus.maciejpiasecki.info\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/plus.maciejpiasecki.info\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/plus.maciejpiasecki.info\/index.php\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/plus.maciejpiasecki.info\/index.php\/wp-json\/wp\/v2\/comments?post=8789"}],"version-history":[{"count":1,"href":"https:\/\/plus.maciejpiasecki.info\/index.php\/wp-json\/wp\/v2\/posts\/8789\/revisions"}],"predecessor-version":[{"id":8791,"href":"https:\/\/plus.maciejpiasecki.info\/index.php\/wp-json\/wp\/v2\/posts\/8789\/revisions\/8791"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/plus.maciejpiasecki.info\/index.php\/wp-json\/wp\/v2\/media\/8790"}],"wp:attachment":[{"href":"https:\/\/plus.maciejpiasecki.info\/index.php\/wp-json\/wp\/v2\/media?parent=8789"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/plus.maciejpiasecki.info\/index.php\/wp-json\/wp\/v2\/categories?post=8789"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/plus.maciejpiasecki.info\/index.php\/wp-json\/wp\/v2\/tags?post=8789"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}